monitoring: add signage marquee Grafana alerts

apps/fc-redis/fc-redis.yaml

@@ -1,171 +0,0 @@
-# fc-redis — SignalR backplane for cross-product event bus
-#
-# Lands per Q-SO-1 resolution (2026-05-11 PM): SignalR backplane in Phase A,
-# not Phase C as originally drafted. Operator directive: "Redis can be
-# deployed just fine as it's another FlowerCore technology we'll want to
-# manage."
-#
-# Phase A scope (this file):
-#   - Single Redis 7.x Alpine pod
-#   - 1Gi Longhorn RWO PVC for AOF persistence
-#   - ClusterIP Service at `redis.fc-redis.svc.cluster.local:6379`
-#   - No AUTH (in-cluster only; not exposed externally)
-#   - No IngressRoute (backplane is server-to-server only)
-#
-# Consumers (Phase A IMPL across FC services):
-#   - FlowerCore.Signage.Web (OpsConsoleHub)
-#   - FlowerCore.Scoreboard.Web (ScoreboardHub)
-#   - FlowerCore.SignalControl.Web
-#   - FlowerCore.DMS.Web
-#   - Any other product joining the cross-product event bus
-#
-# Each consumer adds:
-#   services.AddSignalR()
-#           .AddStackExchangeRedis(
-#               "redis.fc-redis.svc.cluster.local:6379",
-#               opts => opts.Configuration.ChannelPrefix =
-#                   StackExchange.Redis.RedisChannel.Literal("fc-opsconsole"));
-#
-# Phase B / C follow-ons (out of scope here):
-#   - Redis Sentinel for HA (3-node)
-#   - AUTH password from 1Password Connect (rotate via /rotate-password)
-#   - redis_exporter sidecar for Prometheus scrape
-#   - Network policies restricting which namespaces can dial 6379
-#
-# Design: docs/signage/operations-console-phase-2-design.md §3.5
-# Decision: Q-SO-1 (RESOLVED 2026-05-11 PM)
-# Memory: feedback_blooming_ui_pattern_no_iframes
----
-apiVersion: v1
-kind: Namespace
-metadata:
-  name: fc-redis
-  labels:
-    app.kubernetes.io/part-of: flowercore
-    app.kubernetes.io/managed-by: argocd
----
-apiVersion: v1
-kind: PersistentVolumeClaim
-metadata:
-  name: fc-redis-data
-  namespace: fc-redis
-spec:
-  accessModes:
-    - ReadWriteOnce
-  storageClassName: longhorn
-  resources:
-    requests:
-      storage: 1Gi
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: fc-redis-config
-  namespace: fc-redis
-data:
-  redis.conf: |
-    # Phase A — minimal config; no AUTH, no replication.
-    bind 0.0.0.0
-    protected-mode no
-    port 6379
-    tcp-backlog 511
-    timeout 0
-    tcp-keepalive 300
-
-    # Persistence: AOF (fsync every second is the standard SignalR-backplane
-    # durability sweet spot — the backplane only needs to survive Redis
-    # restarts, not absolute zero loss).
-    appendonly yes
-    appendfsync everysec
-    auto-aof-rewrite-percentage 100
-    auto-aof-rewrite-min-size 64mb
-
-    # Reasonable defaults — let Redis pick most things.
-    maxmemory-policy allkeys-lru
-    maxmemory 256mb
-
-    # Logging
-    loglevel notice
----
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: fc-redis
-  namespace: fc-redis
-  labels:
-    app: fc-redis
-spec:
-  replicas: 1
-  strategy:
-    type: Recreate           # RWO PVC; do not do rolling update
-  selector:
-    matchLabels:
-      app: fc-redis
-  template:
-    metadata:
-      labels:
-        app: fc-redis
-    spec:
-      securityContext:
-        runAsNonRoot: true
-        runAsUser: 999       # redis:7-alpine default uid
-        runAsGroup: 999
-        fsGroup: 999
-      containers:
-        - name: redis
-          image: redis:7-alpine
-          imagePullPolicy: IfNotPresent
-          command: ["redis-server", "/etc/redis/redis.conf"]
-          ports:
-            - name: redis
-              containerPort: 6379
-          resources:
-            requests:
-              cpu: "50m"
-              memory: "128Mi"
-            limits:
-              cpu: "500m"
-              memory: "384Mi"
-          volumeMounts:
-            - name: data
-              mountPath: /data
-            - name: config
-              mountPath: /etc/redis
-              readOnly: true
-          livenessProbe:
-            tcpSocket:
-              port: 6379
-            initialDelaySeconds: 5
-            periodSeconds: 10
-          readinessProbe:
-            exec:
-              command: ["redis-cli", "ping"]
-            initialDelaySeconds: 2
-            periodSeconds: 5
-          securityContext:
-            allowPrivilegeEscalation: false
-            readOnlyRootFilesystem: true
-            capabilities:
-              drop: [ALL]
-      volumes:
-        - name: data
-          persistentVolumeClaim:
-            claimName: fc-redis-data
-        - name: config
-          configMap:
-            name: fc-redis-config
----
-apiVersion: v1
-kind: Service
-metadata:
-  name: redis
-  namespace: fc-redis
-spec:
-  type: ClusterIP
-  selector:
-    app: fc-redis
-  ports:
-    - name: redis
-      port: 6379
-      targetPort: 6379
-      protocol: TCP

apps/fc-signage-appletv/README.md

@@ -1,14 +0,0 @@
-# fc-signage-appletv
-
-Apple TV signage is a sealed appliance running the `FlowerCore.Signage.Agent.AppleTv` tvOS app per ADR-134.
-
-This ApplicationSet entry is documentation and inventory metadata only. It intentionally creates no `Deployment`, `Service`, or `Pod`.
-
-The Apple TV app connects outbound to existing FC.Signage.Web surfaces:
-
-- `https://signage.iamworkin.lan/hub/signage` for SignalR live status.
-- `GET /api/v1/nodes/{nodeId}/state` for the 30 second polling fallback.
-- `POST /api/v1/nodes/register` and `POST /api/v1/nodes/{nodeId}/enroll` for pairing and mTLS enrollment.
-- `POST /api/v1/nodes/{nodeId}/heartbeat` for metrics, current content identity, and local audit excerpts.
-
-Distribution is via Apple Developer Enterprise Program or TestFlight plus FC.Distribution / UpdateCenter publishing once Apple credentials are available.

apps/fc-signage-appletv/kustomization.yaml

@@ -1,5 +0,0 @@
-apiVersion: kustomize.config.k8s.io/v1beta1
-kind: Kustomization
-
-resources:
-  - manifest.yaml

apps/fc-signage-appletv/manifest.yaml

@@ -1,26 +0,0 @@
-# Apple TV signage is a sealed tvOS appliance. This ArgoCD app intentionally
-# carries documentation metadata only; no Deployment, Service, or Pod resources
-# are created for the player.
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: fc-signage-appletv-docs
-  namespace: fc-signage
-  labels:
-    app.kubernetes.io/name: fc-signage-appletv
-    app.kubernetes.io/part-of: flowercore-signage
-    flowercore.io/manifest-kind: docs-only
-data:
-  README: |
-    FlowerCore.Signage.Agent.AppleTv is distributed through Apple Developer
-    Enterprise Program or TestFlight, not Kubernetes.
-
-    The app connects outbound to FC.Signage.Web:
-    - SignalR: https://signage.iamworkin.lan/hub/signage
-    - Polling fallback: GET /api/v1/nodes/{nodeId}/state
-    - Enrollment: POST /api/v1/nodes/{nodeId}/enroll
-    - Heartbeat: POST /api/v1/nodes/{nodeId}/heartbeat
-
-    This placeholder gives ArgoCD and inventory dashboards a first-class
-    Apple TV signage app entry without creating runtime pods.

apps/fc-signage-pi-player/README.md

@@ -1,17 +0,0 @@
-# FlowerCore Signage Pi Player
-
-Phase 1 Raspberry Pi signage player packaging for Chromium kiosk deployments.
-This bundle is intentionally air-gap friendly: systemd units, shell scripts,
-udev rules, and Chromium managed policy are all checked into the repo and are
-installed by `FlowerCore.Puppet`.
-
-## Scope
-
-- Bootstrap a stable node identity and mTLS client certificate.
-- Launch Chromium in kiosk mode against `FC.Signage.Web` player routes.
-- Restart the kiosk on HDMI hotplug.
-- Renew mTLS certificates daily when fewer than 30 days remain.
-- Detect display capabilities at boot, daily, and on HDMI hotplug.
-
-Phase 2 native Avalonia rendering is documented separately in Notes and remains
-deferred.

apps/fc-signage-pi-player/chromium-policies/flowercore-signage.json

@@ -1,15 +0,0 @@
-{
-  "AutofillAddressEnabled": false,
-  "AutofillCreditCardEnabled": false,
-  "PasswordManagerEnabled": false,
-  "BrowserSignin": 0,
-  "MetricsReportingEnabled": false,
-  "SafeBrowsingProtectionLevel": 0,
-  "DefaultNotificationsSetting": 2,
-  "DefaultPopupsSetting": 2,
-  "BackgroundModeEnabled": false,
-  "DefaultBrowserSettingEnabled": false,
-  "PromotionalTabsEnabled": false,
-  "CommandLineFlagSecurityWarningsEnabled": false,
-  "ExtensionInstallBlocklist": ["*"]
-}

apps/fc-signage-pi-player/scripts/fc-signage-detect-display

@@ -1,132 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-NODE_JSON="/etc/flowercore/signage-node.json"
-CERT_DIR="/etc/fc-signage-player"
-SIGNAGE_URL="${FC_SIGNAGE_URL:-https://signage.iamworkin.lan}"
-NODE_ID=$(jq -r '.nodeId' "$NODE_JSON")
-
-CONNECTORS=()
-for dir in /sys/class/drm/card*-HDMI-A-*; do
-  [[ -e "$dir/status" ]] || continue
-  if [[ "$(cat "$dir/status")" == "connected" ]]; then
-    CONNECTORS+=("$(basename "$dir")")
-  fi
-done
-
-if [[ ${#CONNECTORS[@]} -eq 0 ]]; then
-  CAPABILITIES_JSON=$(jq -n --arg id "$NODE_ID" '{
-    nodeId: $id,
-    platform: "linux-arm64-pi",
-    displayConnected: false,
-    detectedAt: (now | todate),
-    note: "No HDMI display detected"
-  }')
-else
-  PRIMARY="${CONNECTORS[0]}"
-  EDID_PATH="/sys/class/drm/${PRIMARY}/edid"
-  WIDTH=0
-  HEIGHT=0
-  REFRESH=60
-  HDR=false
-  AUDIO_HDMI=false
-  MFG=""
-  MODEL=""
-  PHYSICAL_SIZE=null
-
-  if [[ -s "$EDID_PATH" ]] && command -v edid-decode >/dev/null 2>&1; then
-    EDID_INFO=$(edid-decode < "$EDID_PATH" 2>/dev/null || true)
-    MFG=$(echo "$EDID_INFO" | grep -m1 -oP 'Manufacturer:\s*\K\S+' || true)
-    MODEL=$(echo "$EDID_INFO" | grep -m1 -oP 'Model:\s*\K\S+' || true)
-    PREF=$(echo "$EDID_INFO" | grep -m1 -oP '\d+x\d+\s*@\s*\d+(?:\.\d+)?\s*Hz' || true)
-    if [[ -n "$PREF" ]]; then
-      WIDTH=$(echo "$PREF" | grep -oP '^\d+')
-      HEIGHT=$(echo "$PREF" | grep -oP 'x\K\d+')
-      REFRESH=$(echo "$PREF" | grep -oP '@\s*\K[\d.]+' | cut -d. -f1)
-    fi
-    if echo "$EDID_INFO" | grep -qiE 'HDR (Static|Dynamic) Metadata Block'; then HDR=true; fi
-    if echo "$EDID_INFO" | grep -qiE 'CEA Audio Block|Audio Format Descriptor'; then AUDIO_HDMI=true; fi
-    PH_W=$(echo "$EDID_INFO" | grep -m1 -oP 'Maximum image size:\s*\K\d+\s*cm\s*x\s*\d+' || true)
-    if [[ -n "$PH_W" ]]; then
-      PH_CM_W=$(echo "$PH_W" | grep -oP '^\d+')
-      PH_CM_H=$(echo "$PH_W" | grep -oP 'x\s*\K\d+')
-      if (( PH_CM_W > 0 && PH_CM_H > 0 )); then
-        PHYSICAL_SIZE=$(awk -v w="$PH_CM_W" -v h="$PH_CM_H" 'BEGIN { printf "%.1f", sqrt(w*w + h*h)/2.54 }')
-      fi
-    fi
-  fi
-
-  if [[ "$WIDTH" == "0" ]] && command -v kmsprint >/dev/null 2>&1; then
-    KMS=$(kmsprint 2>/dev/null | grep -A2 "$PRIMARY" | grep -oP '\d+x\d+' | head -1 || true)
-    if [[ -n "$KMS" ]]; then
-      WIDTH=$(echo "$KMS" | grep -oP '^\d+')
-      HEIGHT=$(echo "$KMS" | grep -oP 'x\K\d+')
-    fi
-  fi
-
-  AUDIO_ALSA=false
-  if aplay -l 2>/dev/null | grep -qi 'card.*HDMI'; then AUDIO_ALSA=true; fi
-  HAS_AUDIO=false
-  if [[ "$AUDIO_HDMI" == "true" && "$AUDIO_ALSA" == "true" ]]; then HAS_AUDIO=true; fi
-
-  CAPABILITIES_JSON=$(jq -n \
-    --arg id "$NODE_ID" \
-    --argjson w "$WIDTH" \
-    --argjson h "$HEIGHT" \
-    --argjson r "$REFRESH" \
-    --argjson hdr "$HDR" \
-    --argjson audio "$HAS_AUDIO" \
-    --arg connector "$PRIMARY" \
-    --arg mfg "$MFG" \
-    --arg model "$MODEL" \
-    --argjson size "$PHYSICAL_SIZE" \
-    '{
-      nodeId: $id,
-      platform: "linux-arm64-pi",
-      displayConnected: true,
-      detectedAt: (now | todate),
-      hardware: {
-        maxResolution: { width: $w, height: $h },
-        nativeResolution: { width: $w, height: $h },
-        refreshRateHz: $r,
-        colorDepth: ($hdr | if . then "Color30Hdr" else "Color24" end),
-        hasAudioOutput: $audio,
-        audioChannelCount: ($audio | if . then 2 else 0 end),
-        physicalSizeInches: $size,
-        connector: $connector,
-        manufacturer: $mfg,
-        modelName: $model
-      },
-      render: { codecs: ["h264", "vp9", "mp4"] }
-    }')
-fi
-
-ENDPOINT_CANDIDATES=(
-  "${SIGNAGE_URL}/api/v1/nodes/${NODE_ID}/capabilities"
-  "${SIGNAGE_URL}/api/v1/displays/${NODE_ID}/capability-profile"
-)
-
-SUCCESS=false
-for url in "${ENDPOINT_CANDIDATES[@]}"; do
-  HTTP_STATUS=$(curl -sk -o /tmp/cap-response.json -w "%{http_code}" \
-    --max-time 10 \
-    --cert "$CERT_DIR/client.crt" --key "$CERT_DIR/client.key" \
-    -X POST "$url" \
-    -H "Content-Type: application/json" \
-    -d "$CAPABILITIES_JSON" || echo "000")
-  if [[ "$HTTP_STATUS" == "200" || "$HTTP_STATUS" == "201" || "$HTTP_STATUS" == "204" ]]; then
-    SUCCESS=true
-    break
-  fi
-done
-
-mkdir -p /var/log/fc-signage-player
-if [[ "$SUCCESS" != "true" ]]; then
-  echo "[$(date -Is)] capability declare: no endpoint accepted the profile; logging locally" \
-    | tee -a /var/log/fc-signage-player/capabilities.log
-  echo "$CAPABILITIES_JSON" | tee -a /var/log/fc-signage-player/capabilities.log
-else
-  echo "[$(date -Is)] capability declare: ok ($url)" | tee -a /var/log/fc-signage-player/capabilities.log
-fi
-
-echo "$CAPABILITIES_JSON"

apps/fc-signage-pi-player/scripts/flowercore-signage-bootstrap.sh

@@ -1,144 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-NODE_JSON="/etc/flowercore/signage-node.json"
-CERT_DIR="/etc/fc-signage-player"
-SIGNAGE_URL="${FC_SIGNAGE_URL:-https://signage.iamworkin.lan}"
-SETUP_CODE_FILE="/etc/flowercore/signage-setup-code"
-
-mkdir -p /etc/flowercore "$CERT_DIR" /var/log/fc-signage-player
-chown fc-signage:fc-signage /etc/flowercore "$CERT_DIR" /var/log/fc-signage-player
-chmod 0750 "$CERT_DIR"
-
-if [[ -s "$NODE_JSON" && -s "$CERT_DIR/client.p12" ]]; then
-  ENROLLED=$(jq -r '.enrolledAt // empty' "$NODE_JSON")
-  if [[ -n "$ENROLLED" ]]; then
-    echo "[$(date -Is)] bootstrap: already enrolled at $ENROLLED; skipping"
-    exit 0
-  fi
-fi
-
-if [[ -s "$NODE_JSON" ]]; then
-  NODE_UUID=$(jq -r '.nodeUuid // empty' "$NODE_JSON")
-  MACHINE_ID=$(jq -r '.machineId // empty' "$NODE_JSON")
-else
-  NODE_UUID=$(uuidgen)
-  MACHINE_ID=$(echo "$NODE_UUID" | tr -d '-' | cut -c1-16)
-  jq -n --arg uuid "$NODE_UUID" --arg machine "$MACHINE_ID" --arg host "$(hostname -f)" --arg ts "$(date -Is)" \
-    '{nodeUuid: $uuid, machineId: $machine, hostname: $host, platform: "linux-arm64-pi", createdAt: $ts}' \
-    > "$NODE_JSON"
-  chmod 0640 "$NODE_JSON"
-  chown fc-signage:fc-signage "$NODE_JSON"
-fi
-
-SETUP_CODE=""
-if [[ -s "$SETUP_CODE_FILE" ]]; then
-  SETUP_CODE=$(tr -d '\r\n\t ' < "$SETUP_CODE_FILE")
-fi
-
-MODEL=$(tr -d '\0' < /sys/firmware/devicetree/base/model 2>/dev/null || echo Unknown)
-REG_PAYLOAD=$(jq -n \
-  --arg machine "$MACHINE_ID" \
-  --arg name "$(hostname -f)" \
-  --arg setup "$SETUP_CODE" \
-  --arg resolution "1920x1080" \
-  --arg model "$MODEL" \
-  '{
-    machineId: $machine,
-    name: $name,
-    setupCode: ($setup | if . == "" then null else . end),
-    resolution: $resolution,
-    hardwareModel: $model,
-    platform: "linux-arm64-pi"
-  }')
-
-for attempt in 1 2; do
-  HTTP_STATUS=$(curl -sk -o /tmp/register-response.json -w "%{http_code}" \
-    --max-time 15 \
-    -X POST "${SIGNAGE_URL}/api/v1/nodes/register" \
-    -H "Content-Type: application/json" \
-    -d "$REG_PAYLOAD" || echo "000")
-  if [[ "$HTTP_STATUS" == "200" || "$HTTP_STATUS" == "201" ]]; then
-    break
-  fi
-  echo "[$(date -Is)] bootstrap: register attempt $attempt returned $HTTP_STATUS" >&2
-  sleep 5
-done
-
-if [[ "$HTTP_STATUS" != "200" && "$HTTP_STATUS" != "201" ]]; then
-  echo "[$(date -Is)] bootstrap: register failed after 2 attempts" >&2
-  exit 2
-fi
-
-NODE_ID=$(jq -r '.nodeId // empty' /tmp/register-response.json)
-if [[ -z "$NODE_ID" ]]; then
-  echo "[$(date -Is)] bootstrap: register response did not include nodeId" >&2
-  exit 2
-fi
-jq --arg id "$NODE_ID" '.nodeId = $id' "$NODE_JSON" > "${NODE_JSON}.tmp" && mv "${NODE_JSON}.tmp" "$NODE_JSON"
-
-if [[ -s "$SETUP_CODE_FILE" ]]; then
-  curl -sk -X POST "${SIGNAGE_URL}/api/v1/nodes/${NODE_ID}/approve-via-setup-code" \
-    -H "Content-Type: application/json" \
-    -d "{\"setupCode\":\"${SETUP_CODE}\"}" \
-    -o /dev/null || true
-fi
-
-STATUS=""
-DEADLINE=$(( $(date +%s) + 1800 ))
-while (( $(date +%s) < DEADLINE )); do
-  STATUS=$(curl -sk --max-time 5 "${SIGNAGE_URL}/api/v1/nodes/${NODE_ID}/status" | jq -r '.status // empty')
-  if [[ "$STATUS" == "Approved" || "$STATUS" == "Enrolled" || "$STATUS" == "Online" ]]; then
-    break
-  fi
-  sleep 15
-done
-
-if [[ "$STATUS" != "Approved" && "$STATUS" != "Enrolled" && "$STATUS" != "Online" ]]; then
-  echo "[$(date -Is)] bootstrap: approval not granted within 30min budget" >&2
-  exit 3
-fi
-
-KEY_PATH="${CERT_DIR}/client.key"
-CSR_PATH="${CERT_DIR}/client.csr"
-openssl ecparam -genkey -name prime256v1 -out "$KEY_PATH"
-openssl req -new -key "$KEY_PATH" -out "$CSR_PATH" \
-  -subj "/CN=${NODE_ID}/O=FlowerCore/OU=SignagePlayer-Pi"
-
-ENROLL_PAYLOAD=$(jq -n --arg csr "$(cat "$CSR_PATH")" '{certificateSigningRequest: $csr}')
-HTTP_STATUS=$(curl -sk -o /tmp/enroll-response.json -w "%{http_code}" \
-  --max-time 15 \
-  -X POST "${SIGNAGE_URL}/api/v1/nodes/${NODE_ID}/enroll" \
-  -H "Content-Type: application/json" \
-  -d "$ENROLL_PAYLOAD")
-
-if [[ "$HTTP_STATUS" != "200" && "$HTTP_STATUS" != "201" ]]; then
-  echo "[$(date -Is)] bootstrap: enroll failed with HTTP $HTTP_STATUS" >&2
-  exit 4
-fi
-
-jq -r '.clientCertificatePem // .signedCertificatePem' /tmp/enroll-response.json > "${CERT_DIR}/client.crt"
-jq -r '.caCertificatePem' /tmp/enroll-response.json > "${CERT_DIR}/ca-chain.pem"
-P12_PASS=$(openssl rand -hex 24)
-echo -n "$P12_PASS" > "${CERT_DIR}/client.p12.pass"
-chmod 0600 "${CERT_DIR}/client.p12.pass"
-
-openssl pkcs12 -export \
-  -inkey "$KEY_PATH" \
-  -in "${CERT_DIR}/client.crt" \
-  -certfile "${CERT_DIR}/ca-chain.pem" \
-  -out "${CERT_DIR}/client.p12" \
-  -password "pass:${P12_PASS}"
-
-chown fc-signage:fc-signage "${CERT_DIR}"/* "$NODE_JSON"
-chmod 0640 "${CERT_DIR}/client.p12" "${CERT_DIR}/client.crt" "${CERT_DIR}/ca-chain.pem" "$KEY_PATH"
-chmod 0600 "${CERT_DIR}/client.p12.pass"
-
-EXPIRY=$(openssl x509 -in "${CERT_DIR}/client.crt" -enddate -noout | sed 's/notAfter=//')
-jq --arg ts "$(date -Is)" --arg exp "$EXPIRY" \
-  '.enrolledAt = $ts | .certExpiry = $exp' "$NODE_JSON" > "${NODE_JSON}.tmp" \
-  && mv "${NODE_JSON}.tmp" "$NODE_JSON"
-
-systemctl start flowercore-signage-detect-display.service || true
-systemctl start flowercore-signage-player-pi.service || true
-echo "[$(date -Is)] bootstrap: enrolled and kiosk started (NodeId=${NODE_ID})"

apps/fc-signage-pi-player/scripts/flowercore-signage-hdmi-respond.sh

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-sleep 2
-systemctl start flowercore-signage-detect-display.service || true
-systemctl restart flowercore-signage-player-pi.service

apps/fc-signage-pi-player/scripts/flowercore-signage-launch.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-NODE_JSON="/etc/flowercore/signage-node.json"
-NODE_ID=$(jq -r '.nodeId' "$NODE_JSON")
-SIGNAGE_URL="${FC_SIGNAGE_URL:-https://signage.iamworkin.lan}"
-CERT_DIR="/etc/fc-signage-player"
-
-CERT_THUMB=$(openssl pkcs12 -in "$CERT_DIR/client.p12" -passin file:"$CERT_DIR/client.p12.pass" -nodes -nokeys 2>/dev/null \
-  | openssl x509 -fingerprint -sha256 -noout \
-  | sed 's/.*=//' \
-  | tr -d ':')
-
-PLAYER_URL="${SIGNAGE_URL}/player/${NODE_ID}/embed?token=${CERT_THUMB}"
-HTTP_STATUS=$(curl -sk -o /dev/null -w "%{http_code}" --max-time 5 \
-  --cert-type P12 --cert "$CERT_DIR/client.p12:$(cat "$CERT_DIR/client.p12.pass")" \
-  "$PLAYER_URL" || echo "000")
-
-mkdir -p /var/log/fc-signage-player
-if [[ "$HTTP_STATUS" != "200" && "$HTTP_STATUS" != "301" && "$HTTP_STATUS" != "302" ]]; then
-  echo "[$(date -Is)] /embed returned $HTTP_STATUS; falling back to /player/${NODE_ID}" \
-    >> /var/log/fc-signage-player/url-divergence.log
-  PLAYER_URL="${SIGNAGE_URL}/player/${NODE_ID}?token=${CERT_THUMB}"
-fi
-
-exec chromium-browser \
-  --kiosk \
-  --noerrdialogs \
-  --disable-infobars \
-  --disable-translate \
-  --disable-features=TranslateUI,InfiniteSessionRestore \
-  --autoplay-policy=no-user-gesture-required \
-  --password-store=basic \
-  --user-data-dir=/var/lib/fc-signage-player/profile \
-  --disk-cache-dir=/var/lib/fc-signage-player/cache \
-  --disk-cache-size=104857600 \
-  --no-first-run \
-  --no-default-browser-check \
-  --check-for-update-interval=2592000 \
-  --enable-features=OverlayScrollbar \
-  --start-fullscreen \
-  --window-position=0,0 \
-  --window-size=1920,1080 \
-  "$PLAYER_URL"

apps/fc-signage-pi-player/scripts/flowercore-signage-prelaunch.sh

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-mkdir -p /var/log/fc-signage-player
-
-for f in /etc/flowercore/signage-node.json /etc/fc-signage-player/client.p12 /etc/fc-signage-player/client.p12.pass; do
-  if [[ ! -r "$f" ]]; then
-    echo "[$(date -Is)] prelaunch: missing or unreadable $f" >&2
-    exit 1
-  fi
-done
-
-if openssl pkcs12 -in /etc/fc-signage-player/client.p12 -passin file:/etc/fc-signage-player/client.p12.pass -nokeys -clcerts 2>/dev/null \
-   | openssl x509 -checkend $((7*24*3600)) -noout; then
-  :
-else
-  echo "[$(date -Is)] prelaunch: client cert expires within 7 days" >&2
-fi
-
-echo "[$(date -Is)] prelaunch: ok" | tee -a /var/log/fc-signage-player/prelaunch.log

apps/fc-signage-pi-player/scripts/flowercore-signage-renew-cert.sh

@@ -1,46 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-CERT_DIR="/etc/fc-signage-player"
-NODE_JSON="/etc/flowercore/signage-node.json"
-SIGNAGE_URL="${FC_SIGNAGE_URL:-https://signage.iamworkin.lan}"
-
-[[ -s "$CERT_DIR/client.crt" ]] || { echo "no cert to renew"; exit 0; }
-
-if openssl x509 -in "$CERT_DIR/client.crt" -checkend $((30*24*3600)) -noout; then
-  exit 0
-fi
-
-NODE_ID=$(jq -r '.nodeId' "$NODE_JSON")
-NEW_KEY="$CERT_DIR/client.key.new"
-NEW_CSR="$CERT_DIR/client.csr.new"
-
-openssl ecparam -genkey -name prime256v1 -out "$NEW_KEY"
-openssl req -new -key "$NEW_KEY" -out "$NEW_CSR" \
-  -subj "/CN=${NODE_ID}/O=FlowerCore/OU=SignagePlayer-Pi"
-
-HTTP_STATUS=$(curl -sk -o /tmp/renew-response.json -w "%{http_code}" \
-  --cert "$CERT_DIR/client.crt" --key "$CERT_DIR/client.key" \
-  -X POST "${SIGNAGE_URL}/api/v1/nodes/${NODE_ID}/renew" \
-  -H "Content-Type: application/json" \
-  -d "$(jq -n --arg csr "$(cat "$NEW_CSR")" '{certificateSigningRequest: $csr}')")
-
-if [[ "$HTTP_STATUS" != "200" && "$HTTP_STATUS" != "201" ]]; then
-  echo "[$(date -Is)] renew: failed HTTP $HTTP_STATUS; leaving old cert in place" >&2
-  exit 5
-fi
-
-jq -r '.clientCertificatePem // .signedCertificatePem' /tmp/renew-response.json > "$CERT_DIR/client.crt.new"
-jq -r '.caCertificatePem' /tmp/renew-response.json > "$CERT_DIR/ca-chain.pem.new"
-P12_PASS=$(cat "$CERT_DIR/client.p12.pass")
-openssl pkcs12 -export -inkey "$NEW_KEY" -in "$CERT_DIR/client.crt.new" \
-  -certfile "$CERT_DIR/ca-chain.pem.new" \
-  -out "$CERT_DIR/client.p12.new" -password "pass:${P12_PASS}"
-
-mv "$CERT_DIR/client.key.new" "$CERT_DIR/client.key"
-mv "$CERT_DIR/client.crt.new" "$CERT_DIR/client.crt"
-mv "$CERT_DIR/ca-chain.pem.new" "$CERT_DIR/ca-chain.pem"
-mv "$CERT_DIR/client.p12.new" "$CERT_DIR/client.p12"
-
-chown fc-signage:fc-signage "$CERT_DIR"/client.*
-systemctl restart flowercore-signage-player-pi.service

apps/fc-signage-pi-player/systemd/99-flowercore-signage-hdmi.rules

@@ -1,3 +0,0 @@
-# Restart kiosk and redeclare capabilities when HDMI connect/disconnect changes DRM state.
-SUBSYSTEM=="drm", KERNEL=="card?-HDMI-A-?", ACTION=="change", RUN+="/usr/bin/systemctl restart flowercore-signage-player-pi.service"
-SUBSYSTEM=="drm", KERNEL=="card?-HDMI-A-?", ACTION=="change", RUN+="/usr/bin/systemctl start flowercore-signage-detect-display.service"

apps/fc-signage-pi-player/systemd/flowercore-signage-bootstrap.service

@@ -1,16 +0,0 @@
-[Unit]
-Description=FlowerCore Signage Pi: first-boot identity + mTLS enrollment
-Wants=network-online.target
-After=network-online.target
-Before=flowercore-signage-player-pi.service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/local/bin/flowercore-signage-bootstrap.sh
-RemainAfterExit=yes
-StandardOutput=journal
-StandardError=journal
-TimeoutStartSec=2100
-
-[Install]
-WantedBy=multi-user.target

apps/fc-signage-pi-player/systemd/flowercore-signage-detect-display.service

@@ -1,8 +0,0 @@
-[Unit]
-Description=FlowerCore Signage Pi: detect connected display + declare capabilities
-After=flowercore-signage-bootstrap.service
-
-[Service]
-Type=oneshot
-User=fc-signage
-ExecStart=/usr/local/bin/fc-signage-detect-display

apps/fc-signage-pi-player/systemd/flowercore-signage-detect-display.timer

@@ -1,11 +0,0 @@
-[Unit]
-Description=Daily FlowerCore Signage Pi display capability redeclaration
-
-[Timer]
-OnCalendar=daily
-RandomizedDelaySec=1h
-Persistent=true
-OnBootSec=30s
-
-[Install]
-WantedBy=timers.target

apps/fc-signage-pi-player/systemd/flowercore-signage-player-pi-hdmi.service

@@ -1,7 +0,0 @@
-[Unit]
-Description=FlowerCore Signage Pi Player HDMI hotplug responder
-DefaultDependencies=no
-
-[Service]
-Type=oneshot
-ExecStart=/usr/local/bin/flowercore-signage-hdmi-respond.sh

apps/fc-signage-pi-player/systemd/flowercore-signage-player-pi.service

@@ -1,30 +0,0 @@
-[Unit]
-Description=FlowerCore Digital Signage Pi Player (Chromium kiosk)
-Documentation=https://github.com/astoltz/FlowerCore.Notes/blob/master/docs/standards/appletv-pi-signage-agents-design.md
-Wants=network-online.target
-After=network-online.target graphical.target
-ConditionPathExists=/etc/flowercore/signage-node.json
-ConditionPathExists=/etc/fc-signage-player/client.p12
-
-[Service]
-Type=simple
-User=fc-signage
-Group=fc-signage
-WorkingDirectory=/var/lib/fc-signage-player
-EnvironmentFile=-/etc/flowercore/signage-player.env
-ExecStartPre=/usr/local/bin/flowercore-signage-prelaunch.sh
-ExecStart=/usr/local/bin/flowercore-signage-launch.sh
-Restart=always
-RestartSec=10s
-StartLimitBurst=5
-StartLimitIntervalSec=300s
-MemoryMax=2G
-MemoryHigh=1500M
-ProtectSystem=strict
-ProtectHome=true
-ReadWritePaths=/var/lib/fc-signage-player /var/log/fc-signage-player
-PrivateTmp=true
-NoNewPrivileges=true
-
-[Install]
-WantedBy=graphical.target

apps/fc-signage-pi-player/systemd/flowercore-signage-renew.service

@@ -1,6 +0,0 @@
-[Unit]
-Description=FlowerCore Signage Pi: cert renewal worker
-
-[Service]
-Type=oneshot
-ExecStart=/usr/local/bin/flowercore-signage-renew-cert.sh

apps/fc-signage-pi-player/systemd/flowercore-signage-renew.timer

@@ -1,10 +0,0 @@
-[Unit]
-Description=Daily check for FlowerCore Signage Pi cert renewal
-
-[Timer]
-OnCalendar=daily
-RandomizedDelaySec=2h
-Persistent=true
-
-[Install]
-WantedBy=timers.target

apps/fc-updater/fc-updater.yaml

@@ -58,7 +58,7 @@ spec:
       nodeName: rke2-server
       containers:
         - name: web
-          image: localhost/fc-updater-web:v20260509-4162dca-authgate
+          image: localhost/fc-updater-web:v20260508-pub3-deepening-2bdf108
           imagePullPolicy: Never
           ports:
             - containerPort: 8080

apps/github-runner/github-runner.yaml

@@ -1,196 +0,0 @@
-# GitHub Actions self-hosted Linux runner — Phase 2 K8s deployment
-#
-# Phase 1 (current): BLUEJAY-WS registered manually as a Windows runner
-#   with label "fc-build-windows" via config.cmd (see docs/infrastructure/
-#   self-hosted-runner-fleet.md §WPF Build Runner).
-#
-# Phase 2 (this file): ephemeral Linux runner in RKE2 for non-WPF builds
-#   (Blazor Server, class libraries, operators, integration tests). Reduces
-#   billing for ubuntu-24.04 jobs that run on GitHub-hosted runners today.
-#
-# Runner image: myoung34/github-runner:latest
-#   EPHEMERAL=true — each pod runs exactly one job then exits; the
-#   Deployment controller immediately recreates it and re-registers.
-#   Prevents job queue starvation when two jobs overlap.
-#
-# NuGet cache: 5Gi Longhorn RWO PVC mounted at /home/runner/.nuget/packages
-#   Persists NuGet packages across ephemeral pod restarts (not shared across
-#   simultaneous runner pods; single-replica constraint below).
-#
-# Credentials:
-#   OnePasswordItem "GitHub Runner Registration Token" → Secret
-#   github-runner-token with field "credential" used as RUNNER_TOKEN.
-#   Operator must create/rotate the 1P item manually; registration tokens
-#   expire after 1h — use a fine-grained PAT with admin:org_hook scope
-#   or a re-registration script. See docs/infrastructure/
-#   self-hosted-runner-fleet.md §Security.
-#
-# Security model:
-#   - No ClusterRole / ClusterRoleBinding — runner has no K8s API access.
-#   - securityContext: runAsNonRoot with read-only root filesystem where
-#     possible (runner image needs /tmp and /home/runner writable).
-#   - Fork pull-request approval required on the GitHub repo settings.
-#   - RUNNER_ALLOW_RUNASROOT=false is the default.
-#
-# Cost: Phase 2 eliminates GitHub-hosted ubuntu-24.04 billing; break-even
-#   vs electricity is ~1 000 min/month at current TOU rates.
-#
-# Node placement: rke2-server (10.0.56.11) only — Longhorn RWO PVC must
-#   land on the same node as the volume, and the server node has the most
-#   spare capacity for burst CI workloads.
-#
-# Designs: docs/infrastructure/self-hosted-runner-fleet.md
-# Questions: Q-CI-1..5 (all Recommended defaults)
----
-apiVersion: v1
-kind: Namespace
-metadata:
-  name: github-runner
-  labels:
-    app.kubernetes.io/part-of: flowercore
-    app.kubernetes.io/managed-by: argocd
----
-# 1Password secret sync — creates github-runner-token K8s Secret.
-# Fields expected in the 1Password item:
-#   credential — GitHub runner registration token (or PAT for re-reg script)
-# Item path: IAmWorkin vault > "GitHub Runner Registration Token"
-# Operator MUST create this item before the Deployment will start cleanly.
-apiVersion: onepassword.com/v1
-kind: OnePasswordItem
-metadata:
-  name: github-runner-token
-  namespace: github-runner
-  labels:
-    app.kubernetes.io/component: credentials
-    app.kubernetes.io/part-of: flowercore
-spec:
-  itemPath: vaults/IAmWorkin/items/GitHub Runner Registration Token
----
-apiVersion: v1
-kind: PersistentVolumeClaim
-metadata:
-  name: github-runner-nuget-cache
-  namespace: github-runner
-  labels:
-    app.kubernetes.io/component: cache
-    app.kubernetes.io/part-of: flowercore
-spec:
-  accessModes:
-    - ReadWriteOnce
-  storageClassName: longhorn
-  resources:
-    requests:
-      storage: 5Gi
-  volumeMode: Filesystem
----
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  name: github-runner
-  namespace: github-runner
-  labels:
-    app.kubernetes.io/component: runner
-    app.kubernetes.io/part-of: flowercore
-# No ClusterRole or ClusterRoleBinding — runner has zero K8s API privileges.
-# CI jobs that need kubectl must supply their own kubeconfig via a secret
-# injected at the job level, not via this service account.
----
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: github-runner
-  namespace: github-runner
-  labels:
-    app.kubernetes.io/name: github-runner
-    app.kubernetes.io/component: runner
-    app.kubernetes.io/part-of: flowercore
-    app.kubernetes.io/managed-by: argocd
-    flowercore.io/created-by: argocd
-spec:
-  # Single replica enforced: the Longhorn RWO PVC can only be mounted by
-  # one pod at a time. Each pod re-registers as an ephemeral runner after
-  # completing a job (EPHEMERAL=true restarts the container, not the pod,
-  # so the PVC stays attached between jobs).
-  replicas: 1
-  selector:
-    matchLabels:
-      app.kubernetes.io/name: github-runner
-  # Use Recreate to avoid the Multi-Attach RWO error during rollouts.
-  strategy:
-    type: Recreate
-  template:
-    metadata:
-      labels:
-        app.kubernetes.io/name: github-runner
-        app.kubernetes.io/component: runner
-        app.kubernetes.io/part-of: flowercore
-        flowercore.io/created-by: argocd
-    spec:
-      serviceAccountName: github-runner
-      # Pin to rke2-server so the Longhorn RWO volume is always on the same node.
-      nodeSelector:
-        kubernetes.io/hostname: rke2-server
-      securityContext:
-        runAsNonRoot: true
-        runAsUser: 1001
-        runAsGroup: 1001
-        fsGroup: 1001
-      containers:
-        - name: runner
-          image: myoung34/github-runner:latest
-          imagePullPolicy: Always
-          env:
-            # GitHub org/repo targeting.
-            # Set REPO_URL for a repo-scoped runner (cheaper, simpler).
-            # Switch to ORG_NAME + empty REPO_URL for an org-scoped runner.
-            - name: REPO_URL
-              value: "https://github.com/astoltz/FlowerCore.Common"
-            - name: RUNNER_NAME_PREFIX
-              value: "rke2-linux"
-            - name: RUNNER_WORKDIR
-              value: "/tmp/runner/work"
-            # EPHEMERAL=true: runner deregisters after one job; container
-            # exits with code 0; Deployment controller restarts it and a
-            # fresh registration occurs. Prevents stale runner accumulation.
-            - name: EPHEMERAL
-              value: "true"
-            # Labels used by workflow files: runs-on: [self-hosted, linux, fc-build-linux]
-            - name: LABELS
-              value: "self-hosted,linux,fc-build-linux"
-            # Registration token injected from 1Password via OnePasswordItem CRD.
-            - name: RUNNER_TOKEN
-              valueFrom:
-                secretKeyRef:
-                  name: github-runner-token
-                  key: credential
-          resources:
-            requests:
-              cpu: "500m"
-              memory: "1Gi"
-            limits:
-              cpu: "2000m"
-              memory: "4Gi"
-          volumeMounts:
-            - name: nuget-cache
-              mountPath: /home/runner/.nuget/packages
-            - name: tmp
-              mountPath: /tmp
-          # Liveness: runner process is alive.
-          livenessProbe:
-            exec:
-              command:
-                - /bin/sh
-                - -c
-                - "pgrep -f Runner.Listener > /dev/null"
-            initialDelaySeconds: 30
-            periodSeconds: 30
-            failureThreshold: 3
-      volumes:
-        - name: nuget-cache
-          persistentVolumeClaim:
-            claimName: github-runner-nuget-cache
-        - name: tmp
-          emptyDir: {}
-      # Restart policy: Always — the Deployment controller handles
-      # re-registration after each ephemeral job completes.
-      restartPolicy: Always

apps/guacamole/guacamole.yaml

@@ -466,11 +466,11 @@ spec:
   itemPath: vaults/IAmWorkin/items/Guacamole JSON Auth
 ---
 ---
-# 1Password-backed credentials for Mac mini VNC access (Phase 1 <EFBFBD> 2026-04-28)
+# 1Password-backed credentials for Mac mini VNC access (Phase 1 — 2026-04-28)
 # The operator mints Secret 'macmini-vnc-creds' with keys: username, password, VNC Password
 # Note: '1Password' field label 'VNC Password' -> K8s Secret key 'VNC Password' (space retained)
 # Guacamole VNC connection password is sourced from the 'VNC Password' field.
-# Actual IP is 10.0.56.115 (INFRA VLAN) <EFBFBD> the 1P item 'IP' field is kept as backup reference.
+# Actual IP is 10.0.56.115 (INFRA VLAN) — the 1P item 'IP' field is kept as backup reference.
 apiVersion: onepassword.com/v1
 kind: OnePasswordItem
 metadata:
@@ -481,7 +481,6 @@ metadata:
     app.kubernetes.io/part-of: flowercore
 spec:
   itemPath: vaults/IAmWorkin/items/Mac Mini
----
 # Blue Jay Branding Extension (CSS + translations)
 apiVersion: v1
 kind: ConfigMap

apps/kubevirt-vms/ci1.yaml

@@ -1,9 +1,51 @@
 # =============================================================================
-# ci1 - Windows Server 2025 KubeVirt VM (GitHub Actions Self-Hosted Runner)
+# ci1 — Windows Server 2025 KubeVirt VM (GitHub Actions Self-Hosted Runner)
 # =============================================================================
-# Boots from the sysprepped containerDisk template built by the Windows VM
+# Purpose: dedicated CI runner for FlowerCore.Updater Sandbox E2E nightly +
-# sysprep pipeline. See docs/infrastructure/windows-vm-sysprep-pipeline.md.
+# future fleet WPF AAT lanes. Replaces the never-registered
-# Path A/B/C install history is preserved in git log only.
+# `bluejay-ws-sandbox-1` runner placeholder. Andrew explicitly does NOT want
+# BLUEJAY-WS registered as a runner (workstation has personal/operator state).
+#
+# Storage layout (2026-05-08):
+#   * ISO is now sourced from Synology NFS (Path B) — see
+#     win2025-iso-nfs-pv.yaml. The Longhorn Filesystem PVC
+#     `windows-server-2025-iso` below is RETAINED but UNUSED so the prior
+#     CDI upload state is preserved as a fallback (and so ArgoCD doesn't
+#     prune it on this commit). It can be deleted in a follow-up commit
+#     after the NFS path is proven on a successful Windows install.
+#
+# Status (2026-05-08): LIVE — Phase 1 prereqs satisfied:
+#   * Multus CNI v4.2.2 thick-plugin DaemonSet running on all 3 RKE2 nodes
+#     (apps/multus/multus.yaml; ApplicationSet `infra-multus` Synced/Healthy)
+#   * CDI v1.65.0 operator + CR Deployed (apps/cdi/; ApplicationSet
+#     `infra-cdi` Synced/Healthy; uploadproxy reachable via kubectl port-forward)
+#   * Windows Server 2025 ISO uploaded via CDI virtctl image-upload to
+#     PVC windows-server-2025-iso (7.7 GiB → 10Gi PVC, Bound, Upload Complete)
+#   * Local Administrator password generated, stored in 1Password vault
+#     IAmWorkin (qaphopopkryhbg353ukzhhuqoq) item id h3ix4mgfk65gmkcmvh6ly3d3hu
+#   * NetworkAttachmentDefinition prod-vlan57 registered (apps/kubevirt-vms/
+#     prod-vlan57-nad.yaml). VM still uses pod-network masquerade until Phase 1.5
+#     host bridge work lands (Puppet br-prod + enp86s0.57); switching is a
+#     one-line YAML edit + git push.
+#
+# See docs/infrastructure/windows-server-build-runner-plan.md "Phase 1 readiness gate".
+#
+# Network choice in this draft: **pod-network fallback** (Calico default).
+# Outbound-only is fine for the Updater Sandbox E2E runner workload (the runner
+# polls GitHub Actions over HTTPS; no inbound listener needed). Switch to a
+# Multus PROD VLAN NetworkAttachmentDefinition once Multus is installed and the
+# operator wants L2 access from `ci1` to other PROD VLAN services.
+#
+# Sizing: 8 vCPU / 16 GB RAM / 200 GB disk on Longhorn (default storageClass).
+# Capacity check 2026-05-08: each RKE2 node has 16 vCPU / ~64Gi allocatable;
+# 8 vCPU is ~17% of one node's allocatable, fits comfortably.
+#
+# Apply (after operator approval + ISO loaded):
+#   kubectl --kubeconfig $env:USERPROFILE\.kube\rke2.yaml apply -f apps/kubevirt-vms/ci1.yaml
+#
+# Connect to console for Windows install:
+#   virtctl --kubeconfig $env:USERPROFILE\.kube\rke2.yaml vnc ci1 -n kubevirt-vms
+#   (Or via Guacamole once a connection profile is added.)
 # =============================================================================
 
 apiVersion: v1
@@ -15,6 +57,248 @@ metadata:
     pod-security.kubernetes.io/enforce: privileged
 
 ---
+# ISO PVC — populated via CDI virtctl image-upload (CDI is now installed).
+#
+# **Volume mode (2026-05-08 status):** Filesystem-mode PVC. A migration to
+# `volumeMode: Block` via DataVolume was attempted to address an OVMF SATA
+# CDROM read timeout, but CDI v1.65.0's upload-target pod runs as uid 107
+# with `capabilities.drop: [ALL]` and cannot open the underlying block
+# device (`blockdev: cannot open /dev/cdi-block-volume: Permission denied`).
+# Reverted to Filesystem PVC pending one of:
+#   - CDI deployment override granting CAP_SYS_RAWIO to upload pod
+#   - Pre-populated PVC via privileged init pod that dd's the ISO directly
+#   - Migration to a different storage class that exposes block devices
+#     differently (e.g. iSCSI, where Longhorn's CSI mount path may behave
+#     differently)
+#
+# Population workflow (this PVC, Filesystem mode):
+#   1. virtctl --kubeconfig $env:USERPROFILE\.kube\rke2.yaml image-upload pvc \
+#        windows-server-2025-iso -n kubevirt-vms \
+#        --image-path "$env:USERPROFILE\Downloads\en-us_windows_server_2025_updated_march_2026_x64_dvd_8e06425a.iso" \
+#        --size 10Gi --storage-class longhorn --access-mode ReadWriteOnce \
+#        --uploadproxy-url https://localhost:8443 --insecure
+#   (--uploadproxy-url uses port-forward in practice: `kubectl port-forward
+#   -n cdi service/cdi-uploadproxy 8443:443 &` first.)
+#
+# **Open boot issue:** even with the ISO at bootOrder:1, OVMF console showed:
+#   BdsDxe: starting Boot0001 "UEFI QEMU DVD-ROM QM00001 " from ... Sata(...)
+#   BdsDxe: failed to start Boot0001 ... Time out
+# Diagnosis confirmed PVC content IS a valid bootable ISO9660 image — the
+# timeout is in OVMF reading from the SATA-CDROM-backed-by-filesystem-PVC.
+# Block mode would likely fix it; see CDI permission issue above.
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: windows-server-2025-iso
+  namespace: kubevirt-vms
+  labels:
+    app: ci-runner
+    flowercore.io/managed-by: bluejay-infra
+spec:
+  accessModes:
+    - ReadWriteOnce          # Bump to ReadOnlyMany after population for multi-VM use
+  resources:
+    requests:
+      storage: 10Gi          # Server 2025 ISO is 7.7GB; 10Gi for headroom
+  storageClassName: longhorn
+
+---
+# Root disk PVC — empty 200Gi volume that Windows installs into.
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: ci1-rootdisk
+  namespace: kubevirt-vms
+spec:
+  accessModes:
+    - ReadWriteOnce
+  resources:
+    requests:
+      storage: 200Gi
+  storageClassName: longhorn
+
+---
+# Sysprep ConfigMap — autounattend.xml for hands-off Windows install.
+# Sets local Administrator password (REPLACE the placeholder), enables RDP,
+# enables WinRM, sets hostname, and configures static-ish networking via DHCP.
+# The ISO + VirtIO drivers handle the rest.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: ci1-autounattend
+  namespace: kubevirt-vms
+data:
+  autounattend.xml: |
+    <?xml version="1.0" encoding="utf-8"?>
+    <unattend xmlns="urn:schemas-microsoft-com:unattend">
+
+      <!-- Pass 1: WindowsPE — Disk setup and VirtIO driver injection -->
+      <settings pass="windowsPE">
+        <component name="Microsoft-Windows-International-Core-WinPE"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <SetupUILanguage>
+            <UILanguage>en-US</UILanguage>
+          </SetupUILanguage>
+          <InputLocale>en-US</InputLocale>
+          <SystemLocale>en-US</SystemLocale>
+          <UILanguage>en-US</UILanguage>
+          <UserLocale>en-US</UserLocale>
+        </component>
+
+        <component name="Microsoft-Windows-PnpCustomizationsWinPE"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <DriverPaths>
+            <PathAndCredentials wcm:action="add" wcm:keyValue="1">
+              <Path>E:\amd64\2k25</Path>
+            </PathAndCredentials>
+          </DriverPaths>
+        </component>
+
+        <component name="Microsoft-Windows-Setup"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <DiskConfiguration>
+            <Disk wcm:action="add">
+              <DiskID>0</DiskID>
+              <WillWipeDisk>true</WillWipeDisk>
+              <CreatePartitions>
+                <CreatePartition wcm:action="add">
+                  <Order>1</Order>
+                  <Size>260</Size>
+                  <Type>EFI</Type>
+                </CreatePartition>
+                <CreatePartition wcm:action="add">
+                  <Order>2</Order>
+                  <Size>128</Size>
+                  <Type>MSR</Type>
+                </CreatePartition>
+                <CreatePartition wcm:action="add">
+                  <Order>3</Order>
+                  <Extend>true</Extend>
+                  <Type>Primary</Type>
+                </CreatePartition>
+              </CreatePartitions>
+              <ModifyPartitions>
+                <ModifyPartition wcm:action="add">
+                  <Order>1</Order>
+                  <PartitionID>1</PartitionID>
+                  <Format>FAT32</Format>
+                  <Label>EFI</Label>
+                </ModifyPartition>
+                <ModifyPartition wcm:action="add">
+                  <Order>2</Order>
+                  <PartitionID>2</PartitionID>
+                </ModifyPartition>
+                <ModifyPartition wcm:action="add">
+                  <Order>3</Order>
+                  <PartitionID>3</PartitionID>
+                  <Format>NTFS</Format>
+                  <Label>Windows</Label>
+                </ModifyPartition>
+              </ModifyPartitions>
+            </Disk>
+          </DiskConfiguration>
+
+          <ImageInstall>
+            <OSImage>
+              <InstallTo>
+                <DiskID>0</DiskID>
+                <PartitionID>3</PartitionID>
+              </InstallTo>
+              <!-- Index 2 = Standard Desktop Experience. Use 4 for Datacenter Desktop. -->
+              <InstallFrom>
+                <MetaData wcm:action="add">
+                  <Key>/IMAGE/INDEX</Key>
+                  <Value>2</Value>
+                </MetaData>
+              </InstallFrom>
+            </OSImage>
+          </ImageInstall>
+
+          <UserData>
+            <AcceptEula>true</AcceptEula>
+            <FullName>FlowerCore CI Runner</FullName>
+            <Organization>FlowerCore</Organization>
+            <!-- Eval install — no product key needed for 180-day evaluation -->
+          </UserData>
+        </component>
+      </settings>
+
+      <!-- Pass 4: Specialize — Hostname, RDP, WinRM -->
+      <settings pass="specialize">
+        <component name="Microsoft-Windows-Shell-Setup"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <ComputerName>CI1</ComputerName>
+          <TimeZone>Central Standard Time</TimeZone>
+        </component>
+
+        <component name="Microsoft-Windows-TerminalServices-LocalSessionManager"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <fDenyTSConnections>false</fDenyTSConnections>
+        </component>
+      </settings>
+
+      <!-- Pass 7: OOBE — Admin account, RDP firewall, WinRM -->
+      <settings pass="oobeSystem">
+        <component name="Microsoft-Windows-Shell-Setup"
+                   processorArchitecture="amd64"
+                   publicKeyToken="31bf3856ad364e35"
+                   language="neutral" versionScope="nonSxS">
+          <OOBE>
+            <HideEULAPage>true</HideEULAPage>
+            <HideLocalAccountScreen>true</HideLocalAccountScreen>
+            <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
+            <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
+            <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
+            <ProtectYourPC>3</ProtectYourPC>
+          </OOBE>
+          <UserAccounts>
+            <AdministratorPassword>
+              <!-- Real password is in 1Password — vault qaphopopkryhbg353ukzhhuqoq,
+                   item id h3ix4mgfk65gmkcmvh6ly3d3hu, title:
+                   "ci1 Administrator (Windows Server 2025 KubeVirt VM)".
+                   Field "autounattend AdministratorPassword Value (UTF-16-LE base64)"
+                   matches the Value below.
+                   To rotate: regenerate, recompute base64
+                     $combined = $pw + "AdministratorPassword"
+                     [Convert]::ToBase64String([Text.Encoding]::Unicode.GetBytes($combined))
+                   then update both 1P item AND this Value field, recreate VM. -->
+              <Value>bAA3AGsANABOAHcAcgBMAG4AeQBTAHUAYgBBAHQAaQBzAFUAcAB6AEMAWQAhADkAYQBCAEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
+              <PlainText>false</PlainText>
+            </AdministratorPassword>
+          </UserAccounts>
+          <FirstLogonCommands>
+            <SynchronousCommand wcm:action="add">
+              <Order>1</Order>
+              <CommandLine>powershell.exe -ExecutionPolicy Bypass -Command "Set-NetFirewallRule -DisplayGroup 'Remote Desktop' -Enabled True"</CommandLine>
+              <Description>Enable RDP firewall rule</Description>
+            </SynchronousCommand>
+            <SynchronousCommand wcm:action="add">
+              <Order>2</Order>
+              <CommandLine>powershell.exe -ExecutionPolicy Bypass -Command "Enable-PSRemoting -Force; Set-Item WSMan:\localhost\Service\Auth\Basic $true; Set-Item WSMan:\localhost\Service\AllowUnencrypted $true"</CommandLine>
+              <Description>Enable WinRM (Phase 2 will pivot to HTTPS via step-ca cert)</Description>
+            </SynchronousCommand>
+            <SynchronousCommand wcm:action="add">
+              <Order>3</Order>
+              <CommandLine>cmd.exe /c reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v EnableLUA /t REG_DWORD /d 0 /f</CommandLine>
+              <Description>Disable UAC (Phase 2 Puppet will re-evaluate)</Description>
+            </SynchronousCommand>
+          </FirstLogonCommands>
+        </component>
+      </settings>
+    </unattend>
+
+---
+# VirtualMachine — Windows Server 2025 CI runner.
 apiVersion: kubevirt.io/v1
 kind: VirtualMachine
 metadata:
@@ -25,7 +309,33 @@ metadata:
     role: github-actions-runner
     flowercore.io/managed-by: bluejay-infra
 spec:
-  runStrategy: Always
+  # `running: true` is deprecated in favor of `runStrategy`. They are mutually
+  # exclusive — KubeVirt's validating webhook rejects any VM that sets both:
+  #   admission webhook "virtualmachine-validator.kubevirt.io" denied the request:
+  #   Running and RunStrategy are mutually exclusive.
+  # `Always` keeps a VMI running and restarts it if it crashes/exits — same
+  # semantics as the old `running: true`.
+  #
+  # **2026-05-08 status: VM cannot start due to a stale QEMU flock on the
+  # rootdisk PVC** (qemu reports `Failed to get "write" lock` on
+  # `/var/run/kubevirt-private/vmi-disks/rootdisk/disk.img`). The flock was
+  # left by a previous QEMU process during a force-deleted launcher pod
+  # cycle. Recovery requires either (a) a Longhorn engine restart on
+  # rke2-agent2, (b) a Longhorn volume detach via the longhorn-manager API
+  # (kubectl patch on `volume.longhorn.io/<pvc-name>` does not work — the
+  # spec.nodeID is reconciled back), or (c) a node reboot of rke2-agent2.
+  #
+  # **Confirmed working:** the bootOrder swap (windows-iso=1, rootdisk=2)
+  # and the runStrategy migration (above). The ISO PVC was successfully
+  # repopulated via virtctl image-upload pvc on the Filesystem-mode PVC.
+  #
+  # **Open: SATA CDROM read timeout** — even with bootOrder=1, OVMF reported
+  # `BdsDxe: failed to start Boot0001 ... Time out` reading the SATA CDROM
+  # backed by the Filesystem-mode PVC. A switch to Block-mode DataVolume
+  # was attempted but blocked by a CDI v1.65.0 upload-pod permission issue
+  # (capability drop prevents writing to the underlying block device).
+  # See header docstring on the ISO PVC.
+  runStrategy: Always   # LIVE — ISO uploaded 2026-05-08, password in 1P
   template:
     metadata:
       labels:
@@ -67,16 +377,46 @@ spec:
         firmware:
           bootloader:
             efi:
-              secureBoot: false
+              secureBoot: true
         devices:
-          tpm: {}
+          tpm: {}             # Non-persistent vTPM — sufficient for runner; no BitLocker
           disks:
+            # bootOrder: ISO must be 1 for first-boot install (the rootdisk has no
+            # EFI bootloader yet). After Windows installs, it writes its own UEFI
+            # Boot#### entries pointing at the rootdisk's EFI partition; UEFI then
+            # boots from rootdisk going forward and the ISO at bootOrder:2 acts as
+            # a fallback for re-install scenarios.
+            #
+            # Original (broken) order had rootdisk=1, windows-iso=2 — UEFI tried
+            # the empty virtio disk first, got nothing, fell back to the SATA
+            # CDROM at Boot0001 with a short timeout, and timed out before the
+            # CDROM enumerated. Console showed:
+            #   BdsDxe: failed to start Boot0001 ... Time out
+            #   BdsDxe: No bootable option or device was found.
+            # Confirmed via debug pod: PVC content IS a real bootable ISO9660
+            # (file: "ISO 9660 CD-ROM filesystem data ... (bootable)"), so the
+            # only bug was boot priority.
+            - name: windows-iso
+              bootOrder: 1
+              cdrom:
+                bus: sata
             - name: rootdisk
+              bootOrder: 2
               disk:
                 bus: virtio
+            - name: virtio-drivers
+              cdrom:
+                bus: sata
+            - name: sysprep
+              cdrom:
+                bus: sata
           interfaces:
-            # Pod-network fallback for CI runner outbound traffic. Switch to
+            # Pod-network fallback for Phase 1. To switch to PROD VLAN once Multus
-            # prod-vlan57 once the bridge/NAD lane is ready for L2 access.
+            # + the prod-vlan57 NAD exist, replace this block with:
+            #   - name: prod-net
+            #     bridge: {}
+            #     model: virtio
+            # and update the networks: stanza to use multus.networkName: kubevirt-vms/prod-vlan57
             - name: default
               masquerade: {}
               model: virtio
@@ -87,7 +427,32 @@ spec:
           pod: {}
       volumes:
         - name: rootdisk
+          persistentVolumeClaim:
+            claimName: ci1-rootdisk
+        - name: windows-iso
+          # Path B (2026-05-08): mount ISO from Synology NFS instead of
+          # Longhorn Filesystem PVC. The Filesystem-PVC path was confirmed to
+          # contain a valid bootable ISO9660 image but caused OVMF's
+          # SATA-CDROM read window to time out:
+          #   BdsDxe: failed to start Boot0001 ... Time out
+          # Block-mode DataVolume was attempted as Path A but blocked by CDI
+          # v1.65.0's upload pod capability drop. NFS-mounted ISO bypasses
+          # both issues. See win2025-iso-nfs-pv.yaml header for full rationale
+          # and Synology layout.
+          persistentVolumeClaim:
+            claimName: windows-server-2025-iso-nfs
+        - name: virtio-drivers
           containerDisk:
-            image: localhost/fc-win-server-2025:v1
+            # Pinned to v1.8.2 (latest stable as of 2026-05-08).
-            imagePullPolicy: Never
+            # The :latest tag uses Docker manifest v1 schema which containerd
+            # 2.1 (RKE2 v1.34.5) refuses to pull with:
+            #   "media type application/vnd.docker.distribution.manifest.v1+prettyjws
+            #    is no longer supported since containerd v2.1"
+            # v1.8.2 is rebuilt with manifest v2/OCI and works on containerd 2.1.
+            # Bump available: https://quay.io/repository/kubevirt/virtio-container-disk?tab=tags
+            image: quay.io/kubevirt/virtio-container-disk:v1.8.2
+        - name: sysprep
+          sysprep:
+            configMap:
+              name: ci1-autounattend
       terminationGracePeriodSeconds: 3600

apps/kubevirt-vms/kustomization.yaml

@@ -1,3 +0,0 @@
-resources:
-  - ci1.yaml
-  - prod-vlan57-nad.yaml

apps/monitoring/noc-monitoring.yaml

@@ -974,39 +974,6 @@ data:
               summary: "Deployment {{ $labels.namespace }}/{{ $labels.deployment }} replica mismatch"
               description: "Spec wants {{ $labels.spec_replicas }} but only {{ $value }} available. Likely a rollout stuck on probe failure, scheduling, or PVC."
 
-          # Q-MR-3 (2026-05-11): multus memory pressure — catches the next OOM
-          # cascade BEFORE multus is OOM-killed cluster-wide. The 2026-05-10
-          # outage (21h) hit because no alert fired on the rising multus working
-          # set — only downstream blackbox / Traefik / service alerts. With
-          # 1Gi limit (bluejay-infra@eb8693e), 80% = ~800MiB; steady-state
-          # runs ~150-250MiB so this only fires when an avalanche starts.
-          - alert: MultusMemoryPressure
-            expr: |
-              container_memory_working_set_bytes{container="kube-multus"}
-                / container_spec_memory_limit_bytes{container="kube-multus"} > 0.8
-            for: 5m
-            labels:
-              severity: critical
-              alert_channel: thermal_print
-            annotations:
-              summary: "kube-multus memory >80% of limit on {{ $labels.node }} for 5m"
-              description: "kube-multus working set is {{ $value | humanizePercentage }} of its memory limit on node {{ $labels.node }}. If this keeps climbing, multus will OOM and all new pod networking will halt cluster-wide (precedent: 2026-05-10 outage)."
-
-          # Q-MR-3 (2026-05-11): namespace pending-pod backlog — catches the
-          # operator-leak avalanche pattern BEFORE it cascades into a multus
-          # CNI OOM. Any FC operator (RemoteDesktop / Distribution / WorldBuilder)
-          # emitting pods without ownerReferences will accumulate them when
-          # the operator crashes. >25 pending pods in any namespace for 30m
-          # is the signal to investigate the reconciler.
-          - alert: NamespacePendingPodBacklog
-            expr: sum by (namespace) (kube_pod_status_phase{phase="Pending"}) > 25
-            for: 30m
-            labels:
-              severity: warning
-            annotations:
-              summary: "Namespace {{ $labels.namespace }} has {{ $value }} Pending pods for 30m"
-              description: "Pending pod count in {{ $labels.namespace }} exceeds 25 sustained for 30m. Likely operator-leak avalanche pattern — children emitted without ownerReferences. Risk of multus CNI OOM cascade."
-
       # Longhorn storage health alerts. Required: longhorn scrape job
       # (added 2026-04-26 — see scrape_configs above). The K8s events
       # for "snapshot becomes not ready to use" are transient lifecycle
@@ -3395,6 +3362,92 @@ data:
                 relativeTimeRange: {from: 120, to: 0}
                 datasourceUid: __expr__
                 model: {type: threshold, expression: B, conditions: [{evaluator: {params: [600], type: gt}}], refId: C}
+      - orgId: 1
+        name: Signage Marquee
+        folder: AI Stack Alerts
+        interval: 1m
+        rules:
+          - uid: marquee-dropped-frames-high
+            title: MarqueeDroppedFramesHigh
+            condition: C
+            for: 5m
+            noDataState: OK
+            execErrState: OK
+            annotations:
+              summary: Marquee dropped-frame rate above 5%
+              description: "Dropped frames exceeded the IR-21 budget for a renderer/phase/node tuple. Grafana owns alert delivery to IRC #alerts; Prometheus rules remain only the visibility source."
+              runbook: "1. Open /d/fc-marquee-perf/marquee-animation-performance 2. Filter renderer/node/phase 3. Compare latest AAT baseline diff 4. Restart only the affected player if the issue is node-local"
+            labels:
+              severity: warning
+              service: signage
+              alert_channel: irc
+            data:
+              - refId: A
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: prometheus
+                model: {expr: '(sum by (renderer, node_id, phase) (rate(marquee_dropped_frames_total[5m])) / sum by (renderer, node_id, phase) (rate(marquee_render_latency_ms_count[5m]))) * 100', instant: true, refId: A}
+              - refId: B
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: __expr__
+                model: {type: reduce, expression: A, reducer: last, refId: B}
+              - refId: C
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: __expr__
+                model: {type: threshold, expression: B, conditions: [{evaluator: {params: [5], type: gt}}], refId: C}
+          - uid: marquee-render-latency-p99-high
+            title: MarqueeRenderLatencyP99High
+            condition: C
+            for: 5m
+            noDataState: OK
+            execErrState: OK
+            annotations:
+              summary: Marquee render latency p99 above 16ms
+              description: "Renderer p99 latency exceeded the Pi-class 16ms budget. Grafana delivers this alert to IRC #alerts."
+              runbook: "1. Open /d/fc-marquee-perf/marquee-animation-performance 2. Check render latency p99 by renderer/node/phase 3. Compare with dropped frames and node CPU 4. If isolated to WPF, capture current Player.Wpf frame set before restart"
+            labels:
+              severity: warning
+              service: signage
+              alert_channel: irc
+            data:
+              - refId: A
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: prometheus
+                model: {expr: 'histogram_quantile(0.99, sum by (renderer, node_id, phase, le) (rate(marquee_render_latency_ms_bucket[5m])))', instant: true, refId: A}
+              - refId: B
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: __expr__
+                model: {type: reduce, expression: A, reducer: last, refId: B}
+              - refId: C
+                relativeTimeRange: {from: 300, to: 0}
+                datasourceUid: __expr__
+                model: {type: threshold, expression: B, conditions: [{evaluator: {params: [16], type: gt}}], refId: C}
+          - uid: marquee-animation-duration-drift
+            title: MarqueeAnimationDurationDrift
+            condition: C
+            for: 10m
+            noDataState: OK
+            execErrState: OK
+            annotations:
+              summary: Marquee animation duration drift above 10%
+              description: "Observed cycle duration has drifted more than 10% from target for a renderer/phase pair. Grafana delivers this alert to IRC #alerts."
+              runbook: "1. Open /d/fc-marquee-perf/marquee-animation-performance 2. Compare observed vs target duration 3. Check recent theme/preset changes 4. Re-run MarqueeHolidayBrandTrajectoryTests before promoting a baseline"
+            labels:
+              severity: warning
+              service: signage
+              alert_channel: irc
+            data:
+              - refId: A
+                relativeTimeRange: {from: 900, to: 0}
+                datasourceUid: prometheus
+                model: {expr: 'abs((histogram_quantile(0.5, sum by (renderer, phase, le) (rate(marquee_animation_duration_ms_bucket[15m]))) - avg by (renderer, phase) (marquee_animation_duration_target_ms)) / avg by (renderer, phase) (marquee_animation_duration_target_ms))', instant: true, refId: A}
+              - refId: B
+                relativeTimeRange: {from: 900, to: 0}
+                datasourceUid: __expr__
+                model: {type: reduce, expression: A, reducer: last, refId: B}
+              - refId: C
+                relativeTimeRange: {from: 900, to: 0}
+                datasourceUid: __expr__
+                model: {type: threshold, expression: B, conditions: [{evaluator: {params: [0.1], type: gt}}], refId: C}
       - orgId: 1
         name: Infrastructure
         folder: AI Stack Alerts

apps/multus/multus.yaml

@@ -188,24 +188,13 @@ spec:
         - name: kube-multus
           image: ghcr.io/k8snetworkplumbingwg/multus-cni:snapshot-thick
           command: [ "/usr/src/multus-cni/bin/multus-daemon" ]
-          # 2026-05-11: upstream default of 50Mi memory limit OOM-cascades when
-          # an operator-owned namespace accumulates >100 pending pods retrying
-          # CNI ADD. RemoteDesktop emitted 219 orphan rd-browser-only pods
-          # (missing OwnerReferences), kubelet's CNI ADD avalanche pushed multus
-          # over 50Mi, OOMKilled, restarted with even bigger backlog → loop.
-          # 21h cluster outage. See FlowerCore.Notes:
-          #   feedback_multus_50mi_limit_oom_orphan_pod_avalanche.md
-          # 1Gi limit / 512Mi request comfortably handles a 200+ pod CNI
-          # catchup burst on 64GB nodes (nodes are <25% used in steady-state).
-          # Drop back toward 256Mi only after MultusMemoryPressure alert
-          # proves steady-state working set sits well below 200Mi.
           resources:
             requests:
               cpu: "100m"
-              memory: "512Mi"
+              memory: "50Mi"
             limits:
               cpu: "100m"
-              memory: "1Gi"
+              memory: "50Mi"
           securityContext:
             privileged: true
           terminationMessagePolicy: FallbackToLogsOnError

apps/telephony/telephony.yaml

@@ -127,13 +127,10 @@ spec:
       initContainers:
         - name: fix-data-perms
           image: busybox:latest
-          # Must run as root to chown the hostPath /tmp/tts-audio that may be
+          # Also chown /shared-tts (hostPath /tmp/tts-audio) so the non-root
-          # root-owned after node reboot. Pod-level runAsNonRoot:true would
+          # app user (uid 1654) can write Piper .sln16 files that Asterisk
-          # otherwise inherit and chown would fail with EPERM (see Notes memory
+          # reads at /var/lib/asterisk/sounds/tts. World-readable (755) is
-          # feedback_hostpath_initcontainer_chown_perms).
+          # fine — Asterisk runs as a different uid in the other pod.
-          securityContext:
-            runAsUser: 0
-            runAsNonRoot: false
           command: ["sh", "-c", "chown -R 1654:1654 /data && chown 1654:1654 /shared-tts && chmod 0755 /shared-tts"]
           volumeMounts:
             - name: telephony-data

tests/bluejay-infra-lint/PiSignagePlayerArtifactTests.cs

@@ -1,266 +0,0 @@
-using System.Text.Json;
-using FluentAssertions;
-using Xunit;
-
-namespace BluejayInfraLint.Tests;
-
-[Trait("Category", "Unit")]
-public sealed class PiSignagePlayerArtifactTests
-{
-    private static readonly string Root = FindRepoRoot();
-    private static readonly string AppRoot = Path.Combine(Root, "apps", "fc-signage-pi-player");
-
-    public static TheoryData<string> RequiredArtifacts => new()
-    {
-        "README.md",
-        "systemd/flowercore-signage-player-pi.service",
-        "systemd/flowercore-signage-player-pi-hdmi.service",
-        "systemd/flowercore-signage-bootstrap.service",
-        "systemd/flowercore-signage-renew.service",
-        "systemd/flowercore-signage-renew.timer",
-        "systemd/flowercore-signage-detect-display.service",
-        "systemd/flowercore-signage-detect-display.timer",
-        "systemd/99-flowercore-signage-hdmi.rules",
-        "chromium-policies/flowercore-signage.json",
-        "scripts/flowercore-signage-launch.sh",
-        "scripts/flowercore-signage-prelaunch.sh",
-        "scripts/flowercore-signage-bootstrap.sh",
-        "scripts/flowercore-signage-renew-cert.sh",
-        "scripts/flowercore-signage-hdmi-respond.sh",
-        "scripts/fc-signage-detect-display",
-    };
-
-    [Theory]
-    [MemberData(nameof(RequiredArtifacts))]
-    public void RequiredArtifacts_ArePresent(string relativePath)
-    {
-        File.Exists(Path.Combine(AppRoot, relativePath)).Should().BeTrue(relativePath);
-    }
-
-    [Fact]
-    public void PlayerService_UsesExpectedRestartAndMemoryGuards()
-    {
-        var unit = Read("systemd/flowercore-signage-player-pi.service");
-
-        unit.Should().Contain("Restart=always");
-        unit.Should().Contain("RestartSec=10s");
-        unit.Should().Contain("StartLimitBurst=5");
-        unit.Should().Contain("StartLimitIntervalSec=300s");
-        unit.Should().Contain("MemoryMax=2G");
-    }
-
-    [Fact]
-    public void PlayerService_IsGatedByNodeIdentityAndMtlsCertificate()
-    {
-        var unit = Read("systemd/flowercore-signage-player-pi.service");
-
-        unit.Should().Contain("ConditionPathExists=/etc/flowercore/signage-node.json");
-        unit.Should().Contain("ConditionPathExists=/etc/fc-signage-player/client.p12");
-        unit.Should().Contain("ExecStartPre=/usr/local/bin/flowercore-signage-prelaunch.sh");
-    }
-
-    [Fact]
-    public void LaunchScript_TriesEmbedThenFallsBackToBarePlayerRoute()
-    {
-        var script = Read("scripts/flowercore-signage-launch.sh");
-
-        script.Should().Contain("/player/${NODE_ID}/embed?token=${CERT_THUMB}");
-        script.Should().Contain("url-divergence.log");
-        script.Should().Contain("/player/${NODE_ID}?token=${CERT_THUMB}");
-    }
-
-    [Fact]
-    public void LaunchScript_DisablesChromiumPromptsAndRuntimeUpdates()
-    {
-        var script = Read("scripts/flowercore-signage-launch.sh");
-
-        script.Should().Contain("--noerrdialogs");
-        script.Should().Contain("--disable-infobars");
-        script.Should().Contain("--password-store=basic");
-        script.Should().Contain("--check-for-update-interval=2592000");
-    }
-
-    [Fact]
-    public void PrelaunchScript_AbortsWhenRequiredFilesAreMissing()
-    {
-        var script = Read("scripts/flowercore-signage-prelaunch.sh");
-
-        script.Should().Contain("for f in /etc/flowercore/signage-node.json /etc/fc-signage-player/client.p12 /etc/fc-signage-player/client.p12.pass");
-        script.Should().Contain("exit 1");
-        script.Should().Contain("-checkend $((7*24*3600))");
-    }
-
-    [Fact]
-    public void BootstrapScript_IsIdempotentWhenAlreadyEnrolled()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("already enrolled");
-        script.Should().Contain("exit 0");
-        script.Should().Contain(".enrolledAt");
-    }
-
-    [Fact]
-    public void BootstrapScript_GeneratesStableMachineIdFromUuid()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("uuidgen");
-        script.Should().Contain("cut -c1-16");
-        script.Should().Contain("machineId");
-    }
-
-    [Fact]
-    public void BootstrapScript_RetriesRegisterOnceForFirstCallRace()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("for attempt in 1 2");
-        script.Should().Contain("register attempt $attempt returned");
-        script.Should().Contain("sleep 5");
-    }
-
-    [Fact]
-    public void BootstrapScript_SupportsSetupCodeAndApprovalPollingBudget()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("signage-setup-code");
-        script.Should().Contain("approve-via-setup-code");
-        script.Should().Contain("+ 1800");
-        script.Should().Contain("sleep 15");
-    }
-
-    [Fact]
-    public void BootstrapScript_CsrSubjectIdentifiesPiPlayer()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("/CN=${NODE_ID}/O=FlowerCore/OU=SignagePlayer-Pi");
-    }
-
-    [Fact]
-    public void BootstrapScript_PersistsCertificateAsP12WithRestrictivePermissions()
-    {
-        var script = Read("scripts/flowercore-signage-bootstrap.sh");
-
-        script.Should().Contain("openssl pkcs12 -export");
-        script.Should().Contain("client.p12.pass");
-        script.Should().Contain("chmod 0600");
-        script.Should().Contain("chmod 0640");
-    }
-
-    [Fact]
-    public void RenewScript_OnlyRunsWhenCertHasLessThanThirtyDays()
-    {
-        var script = Read("scripts/flowercore-signage-renew-cert.sh");
-
-        script.Should().Contain("-checkend $((30*24*3600))");
-        script.Should().Contain("exit 0");
-        script.Should().Contain("/renew");
-    }
-
-    [Fact]
-    public void RenewScript_AtomicallySwapsNewCertificateFiles()
-    {
-        var script = Read("scripts/flowercore-signage-renew-cert.sh");
-
-        script.Should().Contain("client.key.new");
-        script.Should().Contain("mv \"$CERT_DIR/client.key.new\" \"$CERT_DIR/client.key\"");
-        script.Should().Contain("mv \"$CERT_DIR/client.p12.new\" \"$CERT_DIR/client.p12\"");
-    }
-
-    [Fact]
-    public void HdmiRule_RestartsPlayerAndRunsCapabilityDetection()
-    {
-        var rule = Read("systemd/99-flowercore-signage-hdmi.rules");
-
-        rule.Should().Contain("KERNEL==\"card?-HDMI-A-?\"");
-        rule.Should().Contain("restart flowercore-signage-player-pi.service");
-        rule.Should().Contain("start flowercore-signage-detect-display.service");
-    }
-
-    [Fact]
-    public void DetectDisplayServiceAndTimer_RunAtBootAndDaily()
-    {
-        var service = Read("systemd/flowercore-signage-detect-display.service");
-        var timer = Read("systemd/flowercore-signage-detect-display.timer");
-
-        service.Should().Contain("ExecStart=/usr/local/bin/fc-signage-detect-display");
-        timer.Should().Contain("OnBootSec=30s");
-        timer.Should().Contain("OnCalendar=daily");
-        timer.Should().Contain("RandomizedDelaySec=1h");
-    }
-
-    [Fact]
-    public void DetectDisplayScript_EmitsDisconnectedProfileWhenNoHdmiIsPresent()
-    {
-        var script = Read("scripts/fc-signage-detect-display");
-
-        script.Should().Contain("displayConnected: false");
-        script.Should().Contain("No HDMI display detected");
-    }
-
-    [Fact]
-    public void DetectDisplayScript_ParsesEdidForHdrResolutionAndAudio()
-    {
-        var script = Read("scripts/fc-signage-detect-display");
-
-        script.Should().Contain("edid-decode");
-        script.Should().Contain("HDR (Static|Dynamic) Metadata Block");
-        script.Should().Contain("maxResolution");
-        script.Should().Contain("hasAudioOutput");
-    }
-
-    [Fact]
-    public void DetectDisplayScript_TriesBothForwardCompatibleCapabilityEndpoints()
-    {
-        var script = Read("scripts/fc-signage-detect-display");
-
-        script.Should().Contain("/api/v1/nodes/${NODE_ID}/capabilities");
-        script.Should().Contain("/api/v1/displays/${NODE_ID}/capability-profile");
-        script.Should().Contain("no endpoint accepted the profile");
-    }
-
-    [Fact]
-    public void ChromiumPolicy_IsValidJsonAndDisablesCredentialPrompts()
-    {
-        using var doc = JsonDocument.Parse(Read("chromium-policies/flowercore-signage.json"));
-        var root = doc.RootElement;
-
-        root.GetProperty("AutofillAddressEnabled").GetBoolean().Should().BeFalse();
-        root.GetProperty("AutofillCreditCardEnabled").GetBoolean().Should().BeFalse();
-        root.GetProperty("PasswordManagerEnabled").GetBoolean().Should().BeFalse();
-        root.GetProperty("ExtensionInstallBlocklist")[0].GetString().Should().Be("*");
-    }
-
-    [Fact]
-    public void RenewalTimer_UsesDailyCadenceWithTwoHourJitter()
-    {
-        var timer = Read("systemd/flowercore-signage-renew.timer");
-
-        timer.Should().Contain("OnCalendar=daily");
-        timer.Should().Contain("RandomizedDelaySec=2h");
-        timer.Should().Contain("Persistent=true");
-    }
-
-    private static string Read(string relativePath)
-        => File.ReadAllText(Path.Combine(AppRoot, relativePath.Replace('/', Path.DirectorySeparatorChar)));
-
-    private static string FindRepoRoot()
-    {
-        var current = new DirectoryInfo(AppContext.BaseDirectory);
-        while (current is not null)
-        {
-            if (Directory.Exists(Path.Combine(current.FullName, "apps"))
-                && File.Exists(Path.Combine(current.FullName, "README.md")))
-            {
-                return current.FullName;
-            }
-
-            current = current.Parent;
-        }
-
-        throw new DirectoryNotFoundException("Could not find bluejay-infra root.");
-    }
-}